LS345 Control Instrument
With Shield X Search Coil
Call for price quote
Fail Safe Electronics Design
Function Monitor System
Ten Sensitivity Settings
Two Solid State Control Relays
(plug-in electronic modules)
Nema 12 Steel Cabinet
(other NEMA rating cabinets are available)
Wide Temperature Operating Range
(-15° C to +55° C Ambient Air Temperature)
Large Meter Readout
Alarm Indication - Visual & Operating Range
Power Input Option - 120/240V
(50-60 Hz, AC 1 Phase)
Ferrous & Non-ferrous Metal Detection
Two year Warranty
conveyor Search Coils are designed for use with belt, vibrating
and other custom conveyor systems. The Shield X design allows
coil operation in difficult environmental surroundings.
interior shock proofing and an all weather terminal box combine
for long trouble free service.
High Power LS345
RFI Suppression Circuitry
RFI Shielded Cabinet
Model LS345 High Power Control Instrument, combined with the
A20 High Power Flat Coil provides a higher level of sensitivity
that the standard L240 - A10 Flat Coil systems, in installations
where surround coil systems are not practical.
Fiberglass Sections for the Search Coil installation area are
or wood conveyor section and Search Coil at adequate distance
from chipper infeed spout to allow for belt travel after Detector
stops drive motor.
Coil with lightly driven wood shims at the sides of the coil.
Requirements: Conveyor belt must be vulcanized. Metallic
fasteners may not be used.
A 50' length
of shielded cable is furnished to connect Search Coil to Control
Instrument. Control Instrument must be at least three feet away
from the Coil.